Cevapla
 
Seçenekler Stil
  #1  
Alt 08-18-2021, 04:42 PM
FrankJScott FrankJScott isimli Üye şuanda  online konumundadır
Senior Member
 
Üyelik tarihi: Aug 2021
Nerden: Australia
Mesajlar: 642
FrankJScott - İCQ üzeri Mesaj gönder FrankJScott - AİM üzeri Mesaj gönder FrankJScott - YAHOO üzeri Mesaj gönder FrankJScott isimli Üyeye Skype üzeri Mesaj gönder
Standart Best Mechanical Properties And Industrial Materials Info. FastTip#25

International Standards For Mechanical Properties and Industrial Substances
Note: Factory-like conditions may be used to safeguard glue joints from lead weathering and dirt. They also stop any movement while curing. This document also contains glue-in sticks made from treated timber. This document does not cover glued-in rods made of modified and stabilized wood with substantial reductions in shrinkage or swelling. This document does not include glued-in rods made from modified and stabilized timber that have significantly less swelling and shrinkage, such as acetylated or heat treated timbers, impregnated polymer timbers and preservative treated woods. These joints can be used on load-bearing timber structures which are classified as the service classes 1 and 2 according to EN 1995-1-1. They are primarily static or quasistatic as per EN 1990-1-1 and EN 1991-1-1. The joints are able to be used on load-bearing timber structures that are not subjected to prolonged temperatures exceeding 60 degrees Celsius. This standard can be used to enhance the technical base of your company if it is clear where it can be used. Contact a company familiar with the international selection of criteria to help you choose the appropriate standard.

Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures- Testing, requirements and repair strength verification EN 17418:2021
Evaluation methods are crucial for developing a successful system. This subject has been addressed several times. The stage is utilized in any production. EN 17418-2021 is an important standard that regulates testing procedures and their requirements. This document details the requirements for two-component epoxy and polyurethane adhesives for the repair or maintenance of cracks in timber timber constructions made of strength graded structural timber with rectangular crosssection as well as structural fingerjointed timber and glue solid timber. The glue line thickness is up to 8mm.

The adhesive is able to repair cracks that are caused by screws, nails dowel-type attachments, dowels that have holes. This document only addresses adhesives that comply with Clause 8 requirements. This document covers repair of wood. This glue is intended for structural timbers that do not have temperatures of more than 60°C in the shorter time frame as per EN 1995-1-1. The structures can be loaded primarily either quasistatically or statically. EN 1990-1-1 and EN91-1-1 offer more details.

We suggest that the link to the website be followed to see more information about the available records. This is the most likely location to locate standards that can assist you in improving your business's system.

Plastics- Determination of dynamic mechanical properties- Part 3: Flexural vibration- Resonance-curve method (ISO 6721-3:2021) EN ISO 6721-3:2021
Because plastic has adverse environmental effects, it is being removed. EN ISO 6721-3.2021, however, is one of many regulations that are being created to regulate all activities that come into close contact with plastic. This document describes a bending vibration method that uses resonance curves to determine the flexural complex of homogeneous polymers. It also includes damping properties for laminated plastics that are designed to be used as an acoustic insulation material. These properties can be used in calculating frequency and temperature for many purposes.

This standard is strongly advised in cases where your activities are in direct or indirect contact to any of these equipment and materials. This will help ensure that you are in that you are in compliance with international standards for market. This is what will help you remain ahead of the competition in your field.

It is crucial to establish the same standards across an organization.
At first glance, global standards might seem just relevant to local businesses and manufacturing companies. However, globalization is becoming an increasingly prominent trend. Being prepared for international markets ahead of time can assist companies to increase their competitiveness. We are happy to assist you in deciding on the best international document for your business or company.
Alıntı ile Cevapla
Cevapla

Seçenekler
Stil

Yetkileriniz
Sizin Yeni Konu Acma Yetkiniz var yok
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Açık
Smileler Açık
[IMG] Kodları Açık
HTML-KodlarıAçık

Gitmek istediğiniz klasörü seçiniz


Şu Anki Saat: 04:34 PM


Powered by vBulletin® Version 3.8.12 By TheCarbon
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.